Serial Number:   
WORKTABLE SIZE: 49.2" X 55.11"
MAXIMUM LOAD OF TABLE:  11,000 LBS. 
SPINDLE DIAMETER:  4.33"
SPINDLE TAPER: ISO7: 24 No. 50
SPINDLE ROTATION: 10 - 3,000 RPM
MAXIMUM THRUST OF SPINDLE: 3,596 LBS.-F
X AXIS TRAVEL: 78.74"
Y AXIS TRAVEL: 59.05"
Z AXIS TRAVEL: 78.74"
W AXIS TRAVEL: 21.652"
ROTARY TABLE: 360,000.00 DEG

FEED RATE
  X, Y, Z:  0.04" - 236.2" PER/MIN
  W: 0.04" - 78.74" PER/MIN
  B:  0 - 2.5 RPM
RAPID SPEED
  X, Y, Z: 354.33" PER/MIN
  W: 95.48" PER/MIN
  B: 0 - 2.5 RPM
ATC
  MAGAZINE: 40 TOOLS (FIXED)
  MAX TOOL MASS: 44 LBS.
  MAX TOOL LENGTH: 15.7"
  TOOL CHANGE TIME: 16 SEC.
  TOOL SHANK TYPE:  ISO7: 14 CAT 50
  PULLING STUD:  LD50D
POSITIONING ACCURACY
  X,Y,Z:  0.0005"
  B:  9"
  90 DEGREE PIN LOCATIONS: 3.2"
REPEATABILITY
  X,Y,Z: 0.0004"
  B:  9"
  90 DEGREE PIN LOCATIONS: 2"

MACHINE DIMENSIONS (LxWxH): 248.03" X 228.34" X 165.35"
MACHINE WEIGHT:  57,304 LBS. 
EQUIPPED WITH:
  3 AXIS (X,Y,Z) HEIDENHAIN GLASS SCALE FEED BACK
  B AXIS CIRCULAR HEIDENHAIN SCALE
  AUTOMATIC LUBRICATING SYSTEM
  SPIRAL CHIP CONVEYER
  SPINDLE OIL CHILLER DEVICE
  BUILT-IN AIR TO AIR HEAT EXCHANGER FOR ELECTRICAL CABINET
  HYDRAULIC SYSTEM
  WORK LAMP
  RS232 INTERFACE
  PORTABLE MANUAL PULSE GENERATOR
  CHIP GUARD FOR WORK TABLE
  THROUGH THE SPINDLE COOLANT (145 PSI)
  ATC 40 TOOLS
  FANUC 18i-M CONTROL