Omni Machine Tool Corp.'s Newest Arrivals

---

Used Gisholt Model 4L Long-Bed Saddle Type Turret Lathe with Cross-sliding Turret & 12-1/2” Hollow Spindle, S/N 3412X2, from U.S. Government Defense Storage, New Condition.

   

One (used) Gisholt Model 4L Long-Bed Saddle Type Turret Lathe with Crossliding Turret & 12-1/2” Hollow Spindle, S/N 3412X2, from U.S. Government Defense Storage, New Condition.

Equipped with:

Crossliding square turret on rear saddle, turret does not index, and is equipped with a 3-7/8” hole through the turret in the Z-axis direction

Rear-mounted hydraulic tracer to turret with full-length template rail.

Independent DC variable-rate longitudinal turret saddle feed and rapid traverse  via separate ballscrew feed.

4-way rapid traverse to rear turret

2’ extended bed length

Pre-select headstock

Pendant controls

Hard bedways, hard inserted crosslide and turret crosslide ways

Front & rear 24” dia. 4-jaw chucks with 12-5/8” hole, with 2-piece top jaws

9” square quick-indexing toolpost on front crosslide

4-position rotating turret stop on front crosslide

Coolant

Specifications:

31-3/8” Swing over bed

28-1/2” Swing over front carriage wings

24-1/2” Swing past front crosslide

95-1/2” max. Distance from chuck face to turret face

12-1/2” Hole through spindle

A1-20     Spindle nose

7-395 RPM Spindle speeds (36)

50 HP Main motor, 1775 RPM, 208-220/440 volts, 3-ph., 60 cycle, 129/64.5 amps

3 HP / 2 HP DC variable-speed feed drive/rapid traverse motors to rear saddle, with 5 HP motor-generator

.005-.176 IPR Feeds to rear saddle, infinitely variable

9’ X 21’ Floor space required

36,000 lbs. Weight of machine and accessories

Price: Present location, Houston, TX, loaded on truck……………………..$107,500.00

KINGSTON MODEL HK 3000 HOLLOW SPINDLE LATHE MFG  2001

SPECIFICATIONS & EQUIPMENT:

SWING OVER WAYS	30"
SWING OVER CROSS SLIDE	20-1/2"
DISTANCE BETWEEN CENTERS	118"
SPINDLE BORE	12-19/32
SPINDLE NOSE	A2-20
SPINDLE SPEEDS (16)	5-300 RPM
TAILSTOCK TAPER	6MT
WIDTH OF BED	22"
MAIN MOTOR	20HP
FLOOR SPACE	206" X 62"
WEIGHT	18,000 LBS

EQUIPPED WITH:
TAPER ATTACHMENT
ROLLER-TYPE STEADY REST 13-1/2" MAX CAPACITY
(2) 24" 4 JAW CHUCKS (FRONT & REAR) WITH 12-1/2" HOLE
ALORIS DA QUICK CHANGE TOOL POST AND SOME HOLDERS
TIMKEN BEARINGS
MITSUBISHI DRIVE FREQROL - A 500

 

TEMPORARY SPECIFICATIONS SUBJECT TO REVISION

---

USED MAZAK POWERMASTER 1600 CNC LATHE MFD. 1979

 

 

 

 

USED MAZAK POWERMASTER 1600 CNC LATHE MFD. 1979

MAXIMUM SWING OVER BEDWAYS: 34"
MAXIMUM SWING IN GAP: 42"
WIDTH OF GAP: 20"
MAXIMUM DIAMETER OF WORK: 38"
MAXIMUM DISTANCE SPINDLE NOSE TO TURRET FACE: 63"
HOLE THRU SPINDLE: 9-1/2"
SPINDLE NOSE: A2-15"
SPINDLE SPEEDS: 2 TO 750 RPM
MAXIMUM WEIGHT OF WORK PIECE AND CHUCK: 2,200 LBS
TURRET POSITIONS: 8
RAPID TRAVERSE RATES: 236 IPM - X-AXIS
315 IPM - Z-AXIS
TURRET STROKE: 24-1/2" - X-AXIS
45" - Z-AXIS
BED WIDTH: 23.62"
MOTOR: 30/45 KW (60 HP) 220 VOLTS 850/2600 RPM
EQUIPPED WITH:
FANUC 5T CNC CONTROL
SMW BB500/205 AIR CHUCK W/8" HOLE
HARD BEDWAYS
CHIP CONVEYOR
CHIP PAN
MISC. TURRET TOOL HOLDERS
PENDANT CONTROL
TAPE READER
ELECTRICAL CABINET
HYDRAULIC UNIT
OAD: 160" L-R X 95" F-B X 84" HIGH (MACHINE)
180" L-R X 40" F-B X 86" HIGH (CHIP CONVEYOR)
24" L-R X 29" F-B X 61" HIGH (CNC CONTROL CABINET)
29" L-R X 41" F-B X 79" HIGH (ELECTRICAL CABINET)
APPROXIAMTE WEIGHT: 19,000 LBS.

---

USED 2006 Mazak Integrex 300-IVS 60” Multi-Axis CNC Turning Center

Specifications:

  Maximum Swing........................... 30"

      NOTE: Tool eye body may limit max. swing.

  Maximum Swing using Y-Axis.............. 26"-30"

  Maximum Swing over Cross Slide.......... 30"

  Maximum Cutting Diameter: Chucking...... 30"

  Maximum Cutting Length 60".............. 60"

  Maximum Distance Between Chuck Faces 60" 60.2"

                                      

  MAIN SPINDLE SPECIFICATIONS (L):

  Spindle Nose............................ A2-8

  Spindle Bore............................ 3.46"

  Maximum Bar Work.... ................... 3.0" Dia.

  Spindle Speed........................... 4,000 RPM

  Spindle Index (Programmable)............ 0.0001 Deg.

  Spindle Horsepower (Cont./30 Mins.)..... 30/40 HP (AC)

  Spindle Torque.......................... 534 ft-lbs.

 

  SECOND SPINDLE SPECIFICATIONS (R)

  Spindle Nose............................ A2-8

  Spindle Bore............................ 3.46"

  Spindle Speed........................... 4,000 RPM

  Spindle Index (Programmable)............ 0.0001 Deg. C-Axis

  Spindle Horsepower (Cont./30 Min.)...... 30/35 HP (AC)

  Spindle Torque.......................... 368.8 ft-lbs

 

  TURRET AND TOOLING SPECIFICATIONS:

  Type of Turret.......................... 1 Position w/ATC

  Tool Shank Height....................... 1.0"

  Tool Size (Boring Bar Max. Dia.)........ 1.5"

  Magazine Capacity....................... 120 Tools (CAPTO)

  Tool Selection Method................... Random

  Tool to Tool ATC Time................... 1.3 Sec.

  Max. Tool Dia. w/All Pockets Full....... 3.54"

  Max. Tool Dia. w/Adjacent Pockets Empty. 4.92"

  Max. Tool Length (From Gage-Line)....... 15.75"

  Maximum Tool Weight..................... 22 lbs.

  ATC Tool Shank.......................... Capto C6

  Rotary Tool Spindle Speed............... 12,000 RPM

  Rotary Tool Spindle Horsepower (20%ED).. 25 HP (AC)

  Rotary Tool Torque (20%ED).............. 88.5 ft-lbs.

  Maximum Face Mill....................... 4"

  Maximum End Mill........................ 1.25"

  Maximum Drill........................... 1.25"

  Maximum Tap............................. 1-8 UNC

 

  AXIS TRAVELS:

  B-Axis.................................. 225 degrees

                                   (0.0001 degree increments)

  Y-Axis.................................. +/- 4.53"

  X-Axis.................................. 24.8"

  Z-Axis 60" ............................. 62.41"

  Second Headstock W-Axis 60"............. 60.24"                          

 

  AXIS RAPID RATES:

  Y-Axis.................................. 1024 IPM

  X-Axis.................................. 1496 IPM

  Z-Axis.................................. 1496 IPM

  Second Headstock W-Axis................. 1181 IPM

  C-Axis.................................. 555 RPM

 

  GENERAL SPECIFICATIONS:

  Floor Space (WxL) 60" .................. 201.2" x 92.24"

  Machine Height.......................... 114.6"

  Total Power Required (Machine Only)..... 83.5 KVA

       NOTE: Actual Machine Main Transformer

             KVA Rating Will be Greater.

  Air Requirements........................ 72.5 PSI/24.7 CFM

  Machine Weight 60"...................... 28,660 lbs.

                                                                                              

                  Equipped With:

                        Mazatrol Matrix Control                                                               15” Color LCD

                        EIA/ISO Code Input Function                                                        GOO Slope Constant

                        Shape Compensation for Rotary Axes                                       Cylindrical & Polar Coordinate

                        Milling-Spindle Synchronous Tapping                                       Inch/Metric Conversion

                        Cardbus I/F (2-Slot)                                                                       LAN Port

                        USB I/F                                                                                             Y-Axis Control

                        Coolant  Through Milling Head                                                  213 PSI Thru Coolant/Flood Simul-Flowable

                        2^nd Spindle C-Axis 0.0001 Degree Incr.                                      Chuck Air Blast (Second Spindle)

                        10” Thru-Hole Chuck on 1^st & 2^nd Spindles)                             120 Capto-Tool Magazine

                        Rotary –Tool Spindle Speed 12,000 RPM                                  B-Axis 0.0001 Deg/Cntring (Req. EIA/ISO)

                        B-Axis Index 5-Degree (Coupling Clamp)                                 Chip Conveyor (Side, Consep) 1500U

                        Automatic Tool Eye                                                                      Auto Chuck Jaws Open/Close (1 & 2 Spindle)

                        Chuck Open/Close Confirm (1 & 2 Spindle)                             Operator Door Interlock with Lock-Switch

                        Hydraulic Pressure Interlock                                                       Windows XP Operating System

                        Prep 1000 PSI Super Flow Coolant Thru 5k Flood Simul       Overload Detection System

                        Signal Tower (3 Colors Lights)                                                   Prep for 750k Mist Collector with Power & OD123 Duct

                        Prep for SMW Steady Rest Single/Auto                                     C1-C2 Synchronous Operation Function

                        EIA/ISO Function Simultaneous 5-Axis                                    Tool Tip Point Control / Simult. 5-Axes

                        Tool Radius Compensation / 5-Axis                                           Prep for Visual Tool ID/Data Management for CAPTO 120 T Mag

                        Absolute Positioning                                                                     Additional M Code One Set (2 M-Codes)

                        Automatic Front Door Open/Close                                             Mazak Super Flow II High Pressure Coolant 1000 PSI/8GPM

                        SMW Steady Rest SLUZ3 Head                                                 Work Measuring System OMP40 (1^st Spindle H/V Only)

                        LNS Quick Load Servo S3 Short Magazine Barfeed                               

---

Used 2007 Mazak Integrex e650HS2 Multi-Axis Lathe

Control	Matrix
Maximum Swing	36.2"
Spindle Bore	10.2"
Max Machining Length	120"
Spindle Speed	1000 RPM
Main Motor	60 HP
Number of Tools	120 ATC

50HP / 10,000 RPM Milling

60HP / 800 RPM Sub-Spindle

(2)23.82" Air Chucks

Chip Conveyor

---

Used 2006 Mazak Integrex 200-4S Used Lathe

Control	Matrix
Maximum Swing	26"
Spindle Bore / Bar Capacity	3.0" / 2.5"
Max Machining Length	40"
Spindle Speed	5000 RPM
Main Motor	30 HP
Number of Tools	40 ATC

25HP / 12000 RPM Milling

25HP / 5000 RPM Sub-Spindle

(2)8" Hydraulic Chucks

Chip Conveyor

Parts Catcher

Barfeed

Y-Axis

---

NEW, 63" VANGUARD, MODEL TAC-16A, DOUBLE COLUMN CNC VERTICAL BORING MILL WITH ATC

Serial Number:  
WORK TABLE DIAMETER:  1600 MM
MAX. SWING:  2000 MM
MAX. TURNING DIAMETER:  2000 MM
MAX. TURNING HEIGHT:  1600 MM
MAX. WORKPIECE WEIGHT:  8000 MM
MAX. TORQUE:  20,000 NM
VERTICAL TRAVEL:  900 MM
HORIZONTAL TRAVEL:  -150 +2050 MM
RAM CROSS SECTION:  220 X 220 MM
CUTTING TOOL SECTION:  40 X 40 MM
POSITIONS OF TURNING MAGAZINE:  12
MAX. WEIGHT OF EACH TOOL HOLDER:  45 KG
CUTTING FEED:  0.01 - 50 MM/S
RAPID FEED:  8 M/MIN
SPEED OF WORK TABLE:  1 - 254 R/MIN
SPEEDSTEPS OF WORK TABLE:  2
VERTICAL TRAVEL OF CROSS BEAM:  250 X 4 MM
POWER OF MAIN MOTOR:  45/55 KW
POWER OF HORIZONTAL FEED MOTOR:  7 KW
POWER OF VERTICAL FEED MOTOR:  7 KW
POSITION ACCURACY:  IT6
SURFACE FINISH:  RA1.6 UM
WEIGHT:  26,000 KG
DIMENSIONS:  7200 X 5500 X 5800 MM
MODEL OF CONTROL SYSTEM:  FANUC OI-TC

---

USED OKUMA CROWN CNC LATHE MODEL 762E

WITH OSP 700L CONTROL AGE 1991

NOMINAL SIZE 10.63” X 19.68”

CAPACITY

Number of Controlled Axes       2

Swing over Bed                  21.65”

Swing over Cross Slide      15.75”

Max Turning Diameter        10.63”

Spindle Nose Type              A2-6

Spindle Bore                       2.44”

Range of Spindle Speeds    75-4200

MACHINE TRAVELS             (Z-AXIS)

Longitudinal Travel            20.47”

Feedrate, (ipr)                    0.0001-39.37”

Rapid Feedrate, (ipm)        787”

MACHINE TRAVELS (X-AXIS)

Longitudinal Travel 7.28”

Feedrate, (ipr) 0.0001-39.37”

Rapid Feedrate, (ipm) 590”

TURRET

Type V12        (Hydraulic)

No of Tools         12

Size of OD Turning Tool        1”

Size of ID Turning Tool         1.50”

TAILSTOCK

Quill Diameter         3.54”

Taper of Center       M.T. No. 5

Quill Stroke             4.72”

MOTOR

Main Spindle, HP         (12) 20min

                                     (10) 30min

8" Hydraulic Chuck 3 Jaw

Machine Height                    66.9”

Net Weight w/Tailstock         9670 lbs

 

TEMPORARY SPECIFICATIONS SUBJECT TO REVISION

---

NEW, VANGUARD 4" CNC PLANER TYPE HORIZONTAL BORING MILL , MODEL TH6511B

Serial Number:   
WORKTABLE SIZE: 49.2" X 55.11"
MAXIMUM LOAD OF TABLE:  11,000 LBS. 
SPINDLE DIAMETER:  4.33"
SPINDLE TAPER: ISO7: 24 No. 50
SPINDLE ROTATION: 10 - 3,000 RPM
MAXIMUM THRUST OF SPINDLE: 3,596 LBS.-F
X AXIS TRAVEL: 78.74"
Y AXIS TRAVEL: 59.05"
Z AXIS TRAVEL: 78.74"
W AXIS TRAVEL: 21.652"
ROTARY TABLE: 360,000.00 DEG

FEED RATE
  X, Y, Z:  0.04" - 236.2" PER/MIN
  W: 0.04" - 78.74" PER/MIN
  B:  0 - 2.5 RPM
RAPID SPEED
  X, Y, Z: 354.33" PER/MIN
  W: 95.48" PER/MIN
  B: 0 - 2.5 RPM
ATC
  MAGAZINE: 40 TOOLS (FIXED)
  MAX TOOL MASS: 44 LBS.
  MAX TOOL LENGTH: 15.7"
  TOOL CHANGE TIME: 16 SEC.
  TOOL SHANK TYPE:  ISO7: 14 CAT 50
  PULLING STUD:  LD50D
POSITIONING ACCURACY
  X,Y,Z:  0.0005"
  B:  9"
  90 DEGREE PIN LOCATIONS: 3.2"
REPEATABILITY
  X,Y,Z: 0.0004"
  B:  9"
  90 DEGREE PIN LOCATIONS: 2"

MACHINE DIMENSIONS (LxWxH): 248.03" X 228.34" X 165.35"
MACHINE WEIGHT:  57,304 LBS. 
EQUIPPED WITH:
  3 AXIS (X,Y,Z) HEIDENHAIN GLASS SCALE FEED BACK
  B AXIS CIRCULAR HEIDENHAIN SCALE
  AUTOMATIC LUBRICATING SYSTEM
  SPIRAL CHIP CONVEYER
  SPINDLE OIL CHILLER DEVICE
  BUILT-IN AIR TO AIR HEAT EXCHANGER FOR ELECTRICAL CABINET
  HYDRAULIC SYSTEM
  WORK LAMP
  RS232 INTERFACE
  PORTABLE MANUAL PULSE GENERATOR
  CHIP GUARD FOR WORK TABLE
  THROUGH THE SPINDLE COOLANT (145 PSI)
  ATC 40 TOOLS
  FANUC 18i-M CONTROL

---

USED 24" SPEEDFAM MODEL 24BTGW LAPPING MACHINE (UNUSED)